2012 BRM Series Discussion

Home › Forums › Club Races › Racing Calendar, Classes & Regulations › 2012 BRM Series Discussion

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 16, 2011 at 5:03 PM #393
    Avatar photoAutorama
    Keymaster

      What has been discussed so far:

      1. Modify current rules in order to allow the use of kit-based bodies from the same era/class (Group C – IMSA). Those cars would follow all the rules that do not apply to body model.
      2. Modify the rules in order to use any type of screws, o-rings, braid.
      3. Change the rules in order to allow the modification of wood guides in order to use the braid designed for the stock guide (drill 2 holes on the wood guide to accept screws)
      October 31, 2011 at 6:33 AM #1515
      Avatar photoBellator
      Keymaster

        Will run in Q1

        Build it strong.
        Keep it simple.
        Make it work.
              (Leroy Grumman)

        November 5, 2011 at 8:21 PM #1523
        Avatar photoporsche917
        Keymaster

          What voltage will we run the BRM series at – 10.5v or 11v?

          Marty

          November 5, 2011 at 11:46 PM #1524
          Avatar photoAutorama
          Keymaster

            Marty,

            I would run all the series on 11 volts. Do you see an issue running BRMs at 11 volts?

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.