Forum Replies Created
-
Posts
-
I’ll also be bringing some of the home-brew tires Saturday, if you want to use them to run practice laps, or to experiment with.
"Enjoy every sandwich"
-Warren ZevonMark, My printer is a DLP resin printer with a small build volume. Not big enough for chassis, and the resin is way too brittle. I may be investing in an FDM printer, we’re looking into producing larger scale figures.
There’s always Shapeways.
"Enjoy every sandwich"
-Warren Zevon“This all looks like fun…I’d love to experiment with creating tire compounds – but wanted to be sure you realize the rules for ThunderSlot say this:
Rear: OEM Treaded Tires (TYC002R) or Upgrade slick 19X10mm (TYR004R standard) allowed.
Therefore, home-made tires would not be allowed without a rule change (which may be warranted due to the lack of tire availability). ????”Yeah, I do realize, but it was the lack of availability (and the poor quality of the OEM tires) that prompted me to do this. Unfortunately, they can’t be cranked out quickly enough to have a supply ready for everyone right away. Still working out kinks, it looks like the most time consuming method is the only viable option.
The rubber needs to be fully cured under pressure, which takes up a pressure pot needed for producing figures.
Even with de-airing the rubber, some little bubbles remain that create weak spots.
"Enjoy every sandwich"
-Warren ZevonThe next morning the mold is opened
[attachment file=”07-mold open.jpg”]
Urethane is next. This is a 30 shore Urethane from Smooth-On
[attachment file=”08-urethane.jpg”]
Black colorant is added, parts a and b are mixed, de-aired in a vacuum chamber and poured (very slowly) into the molds
[attachment file=”09-urethane pour.jpg”]
Next step: See if they fit.
Attachments:
"Enjoy every sandwich"
-Warren ZevonI’m not convinced the tires that shipped with my T/S Lola are urethane. Vinyl, perhaps? I did run Saturday after the Group C race.
"Enjoy every sandwich"
-Warren ZevonAnother question. Is it within the rules to replace the unforgivably bad driver figure with a decent one, provided it does not weigh less than the O.E.M. part?
"Enjoy every sandwich"
-Warren ZevonIf rubber is that hard to come by, I could make tires, and make them available to everybody (Like, for free) I do realize that is not within the rules, however.
[attachment file=”Thunderslot wheel dims crop.jpg”]
Attachments:
"Enjoy every sandwich"
-Warren ZevonI wanted to give the Thunderjet, err, Thunderslot a go, so I ordered a car, and It showed up today. Couple of questions.
Is the light blue Andretti #21 car spoken for again this go-round? If so I can re-number or paint.
Also, the stock tires (rears) on the model I received have really nasty, distorted injection sites. I doubt the tires can be trued. Is this normal?
[attachment file=”Thunderslot tire crop.jpg”]
Attachments:
"Enjoy every sandwich"
-Warren ZevonMark/DATTO
1. If you do Not have the adjustable chassis the replacement is: Slot.it SICS08T-60B Lancia LC2 Chassis EVO6, https://www.professormotor.com/product-p/sics08t-60b.htm<span class=”wpel-icon wpel-image wpel-icon-9″></span><span class=”wpel-icon wpel-image wpel-icon-9″></span>2. F30s are easy to find and *if needed* buy some from a club member (I have some spares as do most members). In lieu of cash, trade them the ones you ordered when they arrive, no need to wait on the shipment. Ditto for other common parts such as the deep wood guide Slot.it SICH07 and braid.
Adjustable chassis: Check. Set screws: Check
Tires and guide have not shown up yet. Ordered from Scaleracing
http://132slotcar.us/store/"Enjoy every sandwich"
-Warren ZevonYes, thanks, Russell! Turns out I do have the adjustable chassis. Grub screws and deep wood guide are on order, but looks like I will miss the first race. Caretaker duty with my Father-in-law.
I expect a full report 😉
"Enjoy every sandwich"
-Warren ZevonErick – Last time I checked Kings had some F30’s in stock. If they don’t, 132slotcar.us has them in stock.
Chassis – I don’t know if your new car comes with the adjustable chassis but if it does not it is well worth the $10 to get one. The other thing you would want to do is “bake” the chassis to make it as flat as possible. I can do it for you if you are not set up for it.
Looking forward to running with you.
i think mine is the adjustable chassis (new to RTR stuff) There are little inserts with the front axle bushings (plastic) and little removable caps on the axle lower limit spacers.
I watched your video on truing the chassis, but the only semi dependably flat piece of iron I have is the band saw table, and that’s maybe a bit big, and attached to the band saw 😉
"Enjoy every sandwich"
-Warren ZevonMark, thank you for all the advice and information. I did not know about the Saturday morning practice time (Thursday nights will be difficult for me)
I did make the plunge and by the Lancia LC2 in a green and red livery, wearing #6. Seems to have shipped with the yellow (28 tooth?) Crown.
Glad to know I can use the club controller, mine just send cars into the wall (Profesor Motor Carerra)
i have been looking at slot car corner and Prof motor for the tires. Zero grip seem available, but I’m not finding F30 for the rears.
AS far as expectations, for starters, I aim not to make the marshalls hate me 🙂
"Enjoy every sandwich"
-Warren ZevonNewbie question. Do we have to sign up in advance of the series, or do we show up on race day?
"Enjoy every sandwich"
-Warren Zevon
