From John B.
For those of you who have not taken a Policar Vintage F1 car apart, I want to give you fair warning, be careful! Take out the 2 nose screws, the back two screws by the motor and the small brass screw behind the axle. That is all! 5 screws total. All have washers. When you lift the body with the engine together, the rear portion of the exhaust below the axle will slide or pop out of the headers. That portion is held by the rear brass screw. Shown below is a top view of the chassis, a bottom view and the body with engine. Take your time or you will break something. Here is a good You Tube video on how to do it and tune the car. It saved me some grief for sure.