BarkingSpyder

Forum Replies Created

Viewing 15 posts - 226 through 240 (of 533 total)
  • Author
    Posts
  • in reply to: ASCC Monthly Meeting – May 11 2020 #15030
    Avatar photoBarkingSpyder
    Participant

      DORIS the Split Window C5 Vette in process by master modeler Russell Mills.

      "... get on your bad motor scooter and ride!"
      Sammy with Montrose

      in reply to: New Slot.It Orange-bell motor -23k-rpm/170g-tq #14958
      Avatar photoBarkingSpyder
      Participant

        Orange End Bell Alternatives:
        Piranha #PSM21 21.5krpm 165g-cm @ 12v from SCC -$8; as compared to $16-19 for Slot.ITs
        Piranha #PSM25BB 25krpm 185g-cm – $13 *with ball bearings*
        NSR SHARK21  #NSR3041  21.9krpm 164g-cm – $12
        Thunderslot ‘Mach-21’  #THMTMACH21DS 21.5krpm 175g-cm – $22

        "... get on your bad motor scooter and ride!"
        Sammy with Montrose

        in reply to: 2020 Slot.IT DTM Discussion #14956
        Avatar photoBarkingSpyder
        Participant

          SLOT IT 2020 Motors
          MX16 = white endbell replacement for the orange (21.5k) and dark-orange (23k) motors
          2017 used the same model/part#.
          New models have a tatoo or engraving indicating 23k or 21k (MX15) speed.
          (NOTE NSR motors have included a fairly robust tatoo under the foil for years. resistant to oils and Vodoo juice.)
          Slot.IT seems to have stopped offering a ‘two ended’ motor.

          Common specs: 23k RPM, 170g torque @12v, about 5g more torque than the older light-orange 21.5 models.
          MX16 = Endbell drive, so for all small-can Inline applications with modern pods.
          %In the catalog it appears as a Double-ended motor but on retailer’s sites it appears to only have a long shaft on the endbell side%
          MX16-M = Can drive, for many sidewinder applications.  Bell drive pods are still available.

          Black Endbell: MX15
          This is the OEM motor in the DTM cars.  21k RPM, 150g torque @12v
          Double-ended (long shaft on both can and end-bell)
          Same specs and model# as 2017 catalog.

          MX17 = 29k 150g tq ~ replaces the old Red end-bell (now white).

          25k Yellow end-bell seems to only be available as NOS from retailers.  Never seemed as reliable as the NSR 25k anyhow.

          ** Long-can/Boxer motors have not changed.

          "... get on your bad motor scooter and ride!"
          Sammy with Montrose

          in reply to: Adjustable Voltage #14955
          Avatar photoBarkingSpyder
          Participant

            I know costs are tight, but if we move in this direction, I suggest we replace the Pyramid with a better power supply. Digitial, max of 20 or 30 volts, 10amps. This may prevent ‘drops’ we typically experience when everyone is on, and then the surge when two people de-slot.

            "... get on your bad motor scooter and ride!"
            Sammy with Montrose

            in reply to: ASCC Annual Planning Meeting – Feb 7 2020 – More Details #14827
            Avatar photoBarkingSpyder
            Participant

              MORE DETAILS – ANNUAL PLANNING MEETING FEB 7

              AWARDS
              Fastest Lap: Dave. 3.562 sec
              Lap Leader: Alejandro 3,700
              Best Livery: Marc Tyler

              PROCESS FOR EVALUATING CARS FOR SERIES
              After the Oct annual planning meeting, Ary will hold a workshop on how to research a car for suitability as a series candidate.
              — Availability, price, sources
              — Spare parts availability
              — Amount of customization possible
              — Amount of customization required (to have a reasonable performance on our track)
              — Rear track width
              — Chassis quality, durability, float
              — Weight and distribution

              RENT EXTENSION
              Mart is in discussions with the CFO of the leasing company about looking in rates in exchange for a longer term lease.
              However, in general they usually do Not do that.

              TRIAL MEMBERSHIP CONDITIONS
              Fee: $50 for 3-months period. $50 can be applied as partial payment for a Regular or Premium membership.
              Tutoring; A key benefit is 2-hours of on-track tutoring on how to prep a car and driving techniques.
              Benefits: Same as a basic member. Race fees $10.

              VISITOR BENEFITS
              $15 per race for 6 races.
              Visitors can race Six times before they need to convert to a Basic or Premium Membership,
              or they can pay $20 per race for six more races. (basically 2 quarters ~ six months)

              "... get on your bad motor scooter and ride!"
              Sammy with Montrose

              in reply to: Action-Item – Rally Track Write Up #14821
              Avatar photoBarkingSpyder
              Participant

                OK – looks Very Good – I was viewing the forum section – “All About the Track” and did not see any details there. It is certainly much easier to access from the Our Tracks in the main page.
                BTW – again that track has became very entertaining and it’s a great asset that you spread-headed – thanks again!
                (now we just need to get the landscaping done for that puppy …)

                "... get on your bad motor scooter and ride!"
                Sammy with Montrose

                in reply to: New Slot.It Orange-bell motor -23k-rpm/170g-tq #14813
                Avatar photoBarkingSpyder
                Participant

                  2020 SLOT.IT MOTORS – The Slot.IT 2019/20 Catalog shows:
                  — 23,000 RPM ‘Orange’ End-bell motor now has a White end-bell with a 23000 RPM Tattoo on the can.
                  MX16 V12/4. White 23,000 170g/cm White end bell
                  — DTMs apparently come with MX15 V12/4. White 21,000 150g/cm Black end bell
                  Slot.IT Catalog

                  "... get on your bad motor scooter and ride!"
                  Sammy with Montrose

                  in reply to: 2020 Slot.IT DTM Discussion #14807
                  Avatar photoBarkingSpyder
                  Participant

                    Marty, do you have the raw XLS file? The image you posted obviously does not include the Merc. Are there other rows and columns also not visible? Just curious … el Araña

                    "... get on your bad motor scooter and ride!"
                    Sammy with Montrose

                    in reply to: 2019 RevoSlot Series #14787
                    Avatar photoBarkingSpyder
                    Participant

                      Plenty. I will give them to you on Sat 2/15.

                      "... get on your bad motor scooter and ride!"
                      Sammy with Montrose

                      in reply to: Controller holster upgrades #14786
                      Avatar photoBarkingSpyder
                      Participant

                        Great ideas DATTO – I love innovation!

                        "... get on your bad motor scooter and ride!"
                        Sammy with Montrose

                        in reply to: Racing at Capitol City Slot Cars #14729
                        Avatar photoBarkingSpyder
                        Participant

                          I podium-ed in Silver in LMP two weeks ago, Bronze in LMP last Saturday night.  But the two-race-old 0.005 body is shot and it’s probably time to swap out the sealed Hawk-7 LOL.

                          On Monday I was off so I re-wired my Koford controller with larger and longer leads from the blast transistor to the control handle; with the intent of reducing the risk of de-clipping from the power-posts and have more room to move away from the drivers-station.

                          "... get on your bad motor scooter and ride!"
                          Sammy with Montrose

                          in reply to: 2019 Slot.it Group C #14701
                          Avatar photoBarkingSpyder
                          Participant

                            Marc – I sent you a reference list of Slot.IT tires and wheels – check your email – maybe in your Deleted or Trash folder.

                            "... get on your bad motor scooter and ride!"
                            Sammy with Montrose

                            in reply to: Racing at Capitol City Slot Cars #14672
                            Avatar photoBarkingSpyder
                            Participant

                              SERIES FOR 2020  $15/series
                              LMP (LeMans Prototype)    capitalcityslotcar.com/lmp
                              GTP- Pro                             capitalcityslotcar.com/gtp

                              #1 Podium gets either race-fee removed or a body or similar price part.

                              LOCATION
                              824 Grand Avenue Pkwy; Pflugerville   (Upstairs in the Outlaw Paintball ProShop)
                              512.382.0005  Ask for Tom    CapitalCitySlotcar@gmail.com    Address to Tom or Chris.

                              "... get on your bad motor scooter and ride!"
                              Sammy with Montrose

                              in reply to: Racing at Capitol City Slot Cars #14668
                              Avatar photoBarkingSpyder
                              Participant

                                Jan 2020 Update
                                RACE DAY/TIME
                                Changed from Sunday afternoons to Saturday Evenings (6p-8p; one hour per LMP and GTP assuming 8 racers). Format: 3-minute heats; 3-minute PIts; # of heats = number of racers (so full rotation among 8 lanes).  2-3 staffed Marshalls available; Racers “sitting out” need to work the lead-out curve from the climb/donut.

                                PRACTICE
                                Thurs 5pm – 9pm; Winter hours – early close if no shows by 7:30~8pm Summer hours – 10p (when field closes) Sat and Sun 12p – 6p (Paintball Field Hours)

                                "... get on your bad motor scooter and ride!"
                                Sammy with Montrose

                                in reply to: 2020 Series Discussion #14662
                                Avatar photoBarkingSpyder
                                Participant

                                  FINISH 2019 Series.  We did the planning; we bought cars and parts.
                                  — Targa Florio Rally
                                  — 1/24 BRM Group-C

                                  ** let’s use the cars we used once and are collecting dust in our “garages”. Let’s try and keep costs at an acceptable level, esp. in light of the new membership costs.
                                  — NSR Mosler
                                  — NSR917
                                  — Trans-Am – allowing F30s and 3D Chassis and 1mm outside the wheel wells if needed for the F30s.
                                  — TUDOR/LMP

                                  "... get on your bad motor scooter and ride!"
                                  Sammy with Montrose

                                Viewing 15 posts - 226 through 240 (of 533 total)