Home › Forums › Slot Car Talk › Tech Tips / Q & A / Tutorials › Modifying a RC comm lathe to use with slot armatures › Slot.it Challenge Q1 – Round 5 Results
- This topic has 7 replies, 3 voices, and was last updated 14 years, 9 months ago by
Autorama.
-
AuthorPosts
-
March 14, 2011 at 6:18 AM #210
The penultimate race of the series, Round 5 was marked by beautiful weather, great track conditions, and the screening of the Sena documentary at the SXSW festival. A great film, by all accounts, it left its mark on those who saw it.
Round 5 was, by far, one of the smoothest races we have seen with close competition and very few accidents. It was not, however, incident free, as Roy M.’s Porsche just couldn’t be dialed in today, and Ary B.’s Lancia chassis cracked at the point of an early repair.
Round 5 Results
Position / Driver / Laps / Points
1 / Shawn G. (+1 Fastest Lap) / 219 / 11
2 / Marty M. / 215 / 8
3 / Ary B. / 214 / 6
4 / Russell M. / 204 / 5
5 / Brian H. / 203 / 4
6 / Jim J. / 197 / 3
7 / Roy M. / 195 / 2Leader Board
Five rounds run, one remaining.
Position / Driver / Races Run / Points / Change
1 / Ary B. / 5 / 47 / –
2 / Shawn G. / 4 / 38 / –
3 / Marty M. / 5 / 34 / –
4 / Russell M. / 5 / 24 / –
5 / Brian H. / 5 / 20 / +1
6 / Roy M. / 5 / 18 / -1
7 / Jim J. / 5 / 12 / –
8 / Bruce H. / 2 / 3 / –Attachments:
Build it strong.
Keep it simple.
Make it work.
(Leroy Grumman)March 14, 2011 at 8:12 AM #1224Wow! I see Russell and Marty dipped into the 3.9s as well. Congrats you two!
-Shawn
March 14, 2011 at 1:01 PM #1225Thought you guys might find this interesting.
[attachment=0]2011-03-14 13h04_38.png[/attachment]
(I’ll post a more comprehensive analysis after Round 6.)
Build it strong.
Keep it simple.
Make it work.
(Leroy Grumman)March 14, 2011 at 3:37 PM #1226Brian,
That’s pretty cool. Jim’s come up to speed really quick!
-Shawn
March 14, 2011 at 5:24 PM #1227Did something happen? I can only see to results on Shawn’s graph.
March 14, 2011 at 5:42 PM #1228Autorama wrote:Did something happen? I can only see to results on Shawn’s graph.
I don’t understand the question… everyone who has raced four or more races has a line plotted for the total number of laps in round. It’s just a png file… you’re seeing something different?
Build it strong.
Keep it simple.
Make it work.
(Leroy Grumman)March 14, 2011 at 5:51 PM #1229Bellator wrote:I don’t understand the question… everyone who has raced four or more races has a line plotted for the total number of laps in round. It’s just a png file… you’re seeing something different?
I can only see Shaw’s results from Round 3 and Round 5 (straight line up), there are no graph bullets on Round 1,2 and 4.
March 14, 2011 at 5:56 PM #1230Autorama wrote:Bellator wrote:I don’t understand the question… everyone who has raced four or more races has a line plotted for the total number of laps in round. It’s just a png file… you’re seeing something different?
I can only see Shaw’s results from Round 3 and Round 5 (straight line up), there are no graph bullets on Round 1,2 and 4.
Forget it. Shawn did not race on Round2. His “bullet” is just a vertical trace and it was hard to see. All good.
-
AuthorPosts
- You must be logged in to reply to this topic.
