Power will be 12.5 volts – just like we ran in last year’s series.

More information about using NSR tires on Slot.it wheels

I noticed that NSR produces a special rear tire to work on Slot.it wheels – #5262Black.  Once I noticed they produced a unique tire for Slot.it wheels I looked a little deeper at the differences between NSR and Slot.it wheels and discovered there is a 0.10mm difference between the center rib on the wheels.  All Slot.it wheels use a center rib that is 5.1mm wide while all the NSR wheels use a center rib that is 5.0mm wide.

Discovering this I thought there would be an issue in using NSR tires on Slot.it wheels.  Then I measured the NSR tires and discovered that the center rib on the tires measures anywhere from 5.1mm to 5.25mm so I don’t think mounting NSR tires to Slot.it wheels will be an issue.

Having said that, I would definitely make sure the tires were properly glued to the wheels.  At 12.5 volts you don’t want the tires coming off of the wheels.

The Slot.it Group C Build Clinic will be held on Saturday the 10th starting at 1pm.  Looking forward to working with everyone to make this the best Group C series yet.

More information is on the home page story about the clinic.

This a quick reminder that the Slot.it Group C Build and Preparation clinic is happing this Saturday the 10th of December at 1pm.  The clinic is being held at the club’s headquarters at 8222 Jamestown Dr., Austin, TX  78758, Suite E2.  The agenda for the approximately two-hour clinic will go over every step needed to take your Slot.it Group C car from the box to the podium and everything in between.

If you are planning on attending, please bring your Slot.it Group C car, if you already have one, a note pad and a desire to have fun and learn.

Looking forward to seeing everyone this Saturday.  Don’t hesitate to reach out to me if you have any questions or concerns.