Reply To: Proposed 2022 Race Series – Monte Carlo Rally ’61-’71 Proposed builder’s series for rally track

Home Forums Club Races Racing Calendar, Classes & Regulations Proposed 2022 Race Series – Monte Carlo Rally ’61-’71 Proposed builder’s series for rally track Reply To: Proposed 2022 Race Series – Monte Carlo Rally ’61-’71 Proposed builder’s series for rally track

#17112
Avatar photoBarkingSpyder
Participant

    F30s – SHAVED TO 8mm – probably not possible, the internal RIB channel inside the tire is 5mm wide, leaving 1.5mm on each side.
    John is a crafty guy so maybe that *IS* possible ….

    Some Tire and Wheel Ideas:
    http://slot.it/wp-content/uploads/2020/02/A-parte-SLOT.IT_2020-_Slot_IT-POLICAR-accessories-REV-18-02-2020-OK-WEB.pdf

    REAR TIRES
    Slot.IT PT1088-C1 (8mm wide, 16.8 Dia/Tall; C1 compound)

    https://www.nsrslot.it/assets/download/NSR%20catalogo%202021_web.pdf
    NSR 8w X 17od Supergrip (shore-28?) NSR-5204; Ultragrip (shore-22?) NSR-5205
    NSR 8w X 18od Supergrip NSR-5227; Ultra 5228
    NSR 8w X 19.5od Supergrip NSR-5248; Ultra 5249
    ** Ultragrips ??may?? be Too-sticky for the Rally (not enough drift)

    REAR WHEELS
    Slot.IT W15808225A/WH1050-AL (8mm wide, 15.8 Rim Dia/Tall) Alloy/alum; 2.5mm Hub)
    Slot.IT W15808215A/PA24-ALS (8mm wide, 15.8 Rim Dia/Tall) Alloy/alum; 1.5mm Hub)
    Slot.IT W16508215A/PA43-ALS (8mm wide, 16.5 Rim Dia/Tall) Alloy/alum; 1.5mm Hub)
    Slot.IT W17308215A/WH1110-AL (8mm wide, 17.3 Rim Dia/Tall) Alloy/alum; 1.5mm Hub)
    Slot.IT W17308225A/WH1048-AL (8mm wide, 17.3 ​Rim Dia/Tall) Alloy/alum; 2.5mm Hub)

    FRONT WHEELS
    Slot.IT W14308015A/PA33-ALS (8mm wide, 14.3 Rim Dia/Tall) Alloy/alum; 1.5mm Hub)

    FRONT TIRES
    Slot.IT PT19/1096 (8mm wide, 14.2 Dia/Tall; Z1 ZERO-GRIP compound)

    "... get on your bad motor scooter and ride!"
    Sammy with Montrose

    Avatar photo

    BarkingSpyder

    At 4-years old in Pensacola I repaired my steering linkage on my Ford Pedal-car. Dad later converted this car to a Blue Angel with ailerons and elevators with a working "stick/yoke"; the rudder was controlled by the steering wheel. I like all motorsports - I grew up going to a NASCAR Feeder track with Sportsman and Modified classes, and was lucky to attend drag races in 1970 at Orange County Raceway. My first solder-iron was a Christmas gift at 9yo; I modified T-Jets to be AFX spec before AFX Cars were in local stores. I rebuilt a few tractor & car (SIMCA) engines plus transmissions by 15yo (I still have my ring-compressor and valve spring tool) I am a former mountain and road bike geek & perennial sound engineer. Struggling guitar hobbyist and Amp "tweeker"