Home › Forums › Club Races › Racing Calendar, Classes & Regulations › Discussion NSR Rally: Renault Clio R3 vs Abarth S2000 › Reply To: Discussion NSR Rally: Renault Clio R3 vs Abarth S2000
All we need is two people to safely remove the cover panels. As per Marty’s demonstration earlier this year, please do not man-handle the locks; just like a car and woman some gentle turns will work much better than too much force. Carefully test which key opens the top locks (the dog tag notes may be backwards!) Only one key is needed for the top. The other key is for the computer door and the driver’s station.
** This is an excellent opportunity for *more* racers to become comfortable in setting up the Rally track. Thurs 5/24 I will try and leave work early enough to be there by 6:30p. But do not wait for me – call me in-route (512-468-1376) if you experience any problems and I will talk you through it. On Saturday 5/26 I will open the track between 12-1p until at least 4pm.
The extension cord is under the Ark, fish it out with a grabber or a broom, and plug into the power strip below Russ’ pit area. Use a grabber to get down the Swifters and dust the track Gently so the tape is not pulled up. Press any lifing tape down carefully, smoothing it in One direction (otherwise you will wrinkle and may rip it). Time and heat may have allowed some of the tape to lose adhesion. If any parts are significantly lifted or ripped please do Not use the rack-we will notify Marty so he can repair ASAP.
Carefully pull out the power supply out just enough to reach the voltage control knob.
Carefully set the computer on a chair next to the Ark. Be careful of the cord for the speakers so you don’t break the plug. Carefully make sure the power plug is in all the way and make sure the cords are Not in a Spaghetti mess. The computer may just be “sleeping” and should Not need to be powered On or reset.
However it has been a while since the cord was plugged in so its battery may be discharged. If so – give it 10 minutes to get the battery to a decent level then hard start the computer with the power switch. (we should start plugging in the cord every Thurs or Sat to keep the PC charged.)
Click on the SC Timer software if it is not already running (it should be). Re-set for a new 40-lap heat. During practice pause SC Timer if you pull off before 40; otherwise start a new heat between each practice round.
"... get on your bad motor scooter and ride!"
Sammy with Montrose
