I would like:
1) RevoSlot with slot.it rear bearings and 3/32 axles, gears, wheels and tires. This may also impact the front bearing, axle, wheel, tire change. Tires may need testing, but it should be easy to pick. I would not pick a Marcos, but am OK with it if it is comparable to the Porsches.
2) Slot.it McLaren M8A stock except maybe tires.
3) ScaleAuto 1/24 GT we have just been running.
4a) TransAm Scalextric 1/32 with 3D chassis, and running gear. I have a ’70 Camaro running good, and a 3D chassis to build a 1970 Mustang. The stock rear track width is a few mm wider for the Camaro, but I will be able to check the 3D chassis conversions before October and we can test drive them.
4b) If not TransAm I like the suggestion Marty made that we run Scalextric BMW E30 M3’s with 3D chassis and running gear. I especially like the Ref. C3782 Mobil 1 in honor of my late father-in-law who was the Mobil oil distributor for Pomona in the early Mobil 1 days.
5) Rally Targa Florio as suggested by Marty with Fly bodies on 3D chassis. I have an eligible Fly car from way back to convert.
6) 1970 LeMans with Fly bodies on 3D chassis. I have 2 eligible cars to convert.
7) ThunderSlot Lolas and McLarens if comparable. Is anyone testing the McLaren M6A?
8) Group 5 again with some control on unobtainium parts.
9) Group C again.
10) Maybe some other ideas we see between now and October.