The Pony Car Wars wrapped up last Saturday with the 6th and final race of the 2014 Trans Am series. Seven drivers took to the track in their final battle. … Continue reading “Trans Am Race #6 and Series Results”
Welcome to our how-to section! This and several other slot car tutorials, tips and technical articles can be found on our forums. Please use the following link to add comments or … Continue reading “Using a Pressurized Mold to Resin Cast an F1 Wing”
Once again, the historic Trans Am Racing cars roared onto the road course at King’s, engines revving to an atmospheric 25,000 rpm. A field of 7 cars competed in the … Continue reading “Trans Am Series Race #5 Results”
Round 3 of the Trans Am series had a full field of 9 cars. Anyone looking for Marty to back off, was sadly disappointed as, once again the … Continue reading “Trans Am Series Race #3 Results”
The second round of the 2014 Trans Am series saw some close racing. After mounting some new race rubber, Shawn’s won the first heat in his Camaro, putting in … Continue reading “Trans Am Race #2 Results”
The Pony Car Wars began again with the running of Round 1 of the Trans-Am Series race last Saturday. Some teams were scrambling to get their cars on the grid, … Continue reading “Trans Am Race #1 Results”
Round 5 of the 2013 Touring Car Series saw another close battle. Story to follow
Making resin castings of small parts is probably much easier than you might think, especially if the part has a flat side. Parts with a flat side, like many wheel inserts, can be duplicated with a one-piece mold. The RTV mold compound I most commonly use is Polytek Platsil 71-20 Silicone RTV Rubber.
Making resin castings of small parts is probably much easier than you might think, especially if the part has a flat side. Parts with a flat side, like many wheel … Continue reading “Resin Casting Small Parts”
Round 3 of the 2012 running of the Mille Miglia saw only 4 cars make the start. Ferrari fielded two cars, the Touring-bodied 166MM of Gentleman Jim Johnson and the … Continue reading “Mille Miglia Round 3 Results”
Last Saturday saw one of the largest race fields yet as 8 drivers competed in Round 3 of the Slot.It Challenge. No shortage of course marshals this time! In the … Continue reading “2012 Slot.it Challenge – 60’s Prototypes: Round#3 Results”